Front Passenger Window Switch	Rear Passenger Window Switch
Pry black cover plate up with small flat-bladed screwdriver.	Pry small black cover plate up with small flat-bladed screwdriver.
On underside of cover plate, you may have to pry off black plastic surround by releasing small hooks at four corners.	On ends of block, disconnect the switch from its connector by gently prying up the black plastic frame over the white locking block and pull the two sections apart. Replace switch and reassemble in reverse order.
Once the black plastic surround is off, use small flat-bladed screwdriver to lift black plastic up over the white locking block on white switch body. Pull switch body free.
Switch is now free. Replace and reassemble in reverse order.